Home > Engine Components > Piston & Cylinder Kits and Related
Sort By:
Page of 4
Tru-Arc Piston Pin Retainers Spiral Piston Pin Retainers Head Spacers, 1500-1600cc, .030"
  • Fits all pistons w/ 22mm pins
  • Set of 8
  • Fits all pistons w/ 22mm pins
  • Set of 8
  • Allow for adjusting deck height / compression ratio easily without removing cylinders
  • Compensates for 0 deck height when heads have been machined or in stroker setups
  • Set of 4
Head Spacers, 1500-1600cc, .060" Cylinder Shims, 85.5/87/88mm, .010" Cylinder Shims, 85.5/87/88mm, .020"
  • Allow for adjusting deck height / compression ratio easily without removing cylinders
  • Compensates for 0 deck height when heads have been machined or in stroker setups
  • Set of 4
  • Allow for adjusting deck height without machining pistons
  • Compensates when case is surface machined
  • Corrects for increase in stroke
  • Set of 4
  • Allow for adjusting deck height without machining pistons
  • Compensates when case is surface machined
  • Corrects for increase in stroke
  • Set of 4
Cylinder Shims, 85.5/87/88mm, .030" Cylinder Shims, 85.5/87/88mm, .040" Cylinder Shims, 85.5/87/88mm, .060"
  • Allow for adjusting deck height without machining pistons
  • Compensates when case is surface machined
  • Corrects for increase in stroke
  • Set of 4
  • Allow for adjusting deck height without machining pistons
  • Compensates when case is surface machined
  • Corrects for increase in stroke
  • Set of 4
  • Allow for adjusting deck height without machining pistons
  • Compensates when case is surface machined
  • Corrects for increase in stroke
  • Set of 4
Cylinder Shims, 85.5/87/88mm, .090" Cylinder Shims, 90.5/92mm, .010" Cylinder Shims, 90.5/92mm, .020"
  • Allow for adjusting deck height without machining pistons
  • Compensates when case is surface machined
  • Corrects for increase in stroke
  • Set of 4
  • Allow for adjusting deck height without machining pistons
  • Compensates when case is surface machined
  • Corrects for increase in stroke
  • Clearanced for 8mm and 10mm studs
  • Set of 4
  • Allow for adjusting deck height without machining pistons
  • Compensates when case is surface machined
  • Corrects for increase in stroke
  • Clearanced for 8mm and 10mm studs
  • Set of 4
Cylinder Shims, 90.5/92mm, .030" Cylinder Shims, 90.5/92mm, .040" Cylinder Shims, 90.5/92mm, .060"
  • Allow for adjusting deck height without machining pistons
  • Compensates when case is surface machined
  • Corrects for increase in stroke
  • Clearanced for 8mm and 10mm studs
  • Set of 4
  • Allow for adjusting deck height without machining pistons
  • Compensates when case is surface machined
  • Corrects for increase in stroke
  • Clearanced for 8mm and 10mm studs
  • Set of 4
  • Allow for adjusting deck height without machining pistons
  • Compensates when case is surface machined
  • Corrects for increase in stroke
  • Clearanced for 8mm and 10mm studs
  • Set of 4
Cylinder Shims, 90.5/92mm, .090" Cylinder Shims, 94mm, .010" Cylinder Shims, 94mm, .020"
  • Allow for adjusting deck height without machining pistons
  • Compensates when case is surface machined
  • Corrects for increase in stroke
  • Clearanced for 8mm and 10mm studs
  • Set of 4
  • Allow for adjusting deck height without machining pistons
  • Compensates when case is surface machined
  • Corrects for increase in stroke
  • Clearanced for 8mm and 10mm studs
  • Set of 4
  • Allow for adjusting deck height without machining pistons
  • Compensates when case is surface machined
  • Corrects for increase in stroke
  • Clearanced for 8mm and 10mm studs
  • Set of 4
Cylinder Shims, 94mm, .030" Cylinder Shims, 94mm, .040" Cylinder Shims, 94mm, .060"
  • Allow for adjusting deck height without machining pistons
  • Compensates when case is surface machined
  • Corrects for increase in stroke
  • Clearanced for 8mm and 10mm studs
  • Set of 4
  • Allow for adjusting deck height without machining pistons
  • Compensates when case is surface machined
  • Corrects for increase in stroke
  • Clearanced for 8mm and 10mm studs
  • Set of 4
  • Allow for adjusting deck height without machining pistons
  • Compensates when case is surface machined
  • Corrects for increase in stroke
  • Clearanced for 8mm and 10mm studs
  • Set of 4
Cylinder Shims, 94mm, .090" Head Spacers, 1500-1600cc, .040" Cylinder Shims, 1700cc/1800cc/2.0L Type 4, .010"
  • Allow for adjusting deck height without machining pistons
  • Compensates when case is surface machined
  • Corrects for increase in stroke
  • Clearanced for 8mm and 10mm studs
  • Set of 4
  • Allow for adjusting deck height / compression ratio easily without removing cylinders
  • Compensates for 0 deck height when heads have been machined or in stroker setups
  • Set of 4
  • Allow for adjusting deck height without machining pistons
  • Compensates when case is surface machined
  • Corrects for increase in stroke
  • Set of 4
Cylinder Shims, 1700cc/1800cc/2.0L Type 4, .020" Cylinder Shims, 1700cc/1800cc/2.0L Type 4, .030" Cylinder Shims, 1700cc/1800cc/2.0L Type 4, .040"
  • Allow for adjusting deck height without machining pistons
  • Compensates when case is surface machined
  • Corrects for increase in stroke
  • Set of 4
  • Allow for adjusting deck height without machining pistons
  • Compensates when case is surface machined
  • Corrects for increase in stroke
  • Set of 4
  • Allow for adjusting deck height without machining pistons
  • Compensates when case is surface machined
  • Corrects for increase in stroke
  • Set of 4
Cylinder Shims, 1700cc/1800cc/2.0L Type 4, .060" Cylinder Shims, 1700cc/1800cc/2.0L Type 4, .090" Piston Pin Retainer Buttons, 85.5mm
  • Allow for adjusting deck height without machining pistons
  • Compensates when case is surface machined
  • Corrects for increase in stroke
  • Set of 4
  • Allow for adjusting deck height without machining pistons
  • Compensates when case is surface machined
  • Corrects for increase in stroke
  • Set of 4
  • Prevents costly engine damage from broken stock clips that are easily damaged during installation
  • Set of 8