Home > Engine Components > Heads > Performance Heads
Sort By:
Page of 2
STAGE 1 INTAKE GASKET (2) STAGE 2 INTAKE GASKET (2) STAGE 3 INTAKE GASKET (2)
STAGE 1 INTAKE GASKET (2)
Our Price: $11.39
STAGE 2 INTAKE GASKET (2)
Our Price: $11.39
STAGE 3 INTAKE GASKET (2)
Our Price: $11.39
  • Replacement intake gasket for Stage 1 heads
  • Set of 2
  • Replacement intake gasket for Stage 2 heads
  • Set of 2
  • Replacement intake gasket for Stage 3 heads
  • Set of 2
Bare Dual Port Cylinder Head, 85.5mm DUAL PORT HEAD,14MM,COMPLETE            GTV-2 DP CYL HEAD,BARE,EA
GTV-2 DP CYL HEAD,BARE,EA
Our Price: $262.43
  • Comes with 40mm x 35.5mm valve seats and bronze valve guides installed
  • Rocker, exhaust and intake studs are included
  • Standard 85.5mm bore
  • 58cc chamber
  • Alt P/N: 042-101-355CH
  • 40 x 35.5mm Valve Seats and Bronze Valve Guides installed
  • Rocker, Exhaust, and Intake Studs are included
  • Standard 85.5mm Bore and 53cc Chamber
Complete  GTV-2 Dual Port Cylinder Head, 85.5mm Bore, Single Valve Springs Complete Dual Port Cylinder Head w/ Competition Valve Job, 94mm Bore, Dual Springs Complete Dual Port Cylinder Head, 85.5mm Bore, Single Valve Springs
  • 40 x 35.5mm stainless steel valves, single hi-rev valve springs, Chromoly retainers,
    hardened keepers, rocker, exhaust and intake studs installed
  • Standard 85.5mm Bore and 53cc Chamber
  • 94mm Bore with 40mm x 35.5mm stainless steel valves, 58cc chamber
  • Dual hi-rev valve springs, Chromoly retainers, hardened keepers, rocker, exhaust and intake studs
  • Professional performance valve job and assembly
  • Assembled with 40mm x 35.5mm stainless steel valves, single hi-rev valve springs, Chromoly retainers,
    hardened keepers, rocker, exhaust and intake studs
  • Standard 85.5mm Bore
  • 58cc chamber
Stage 3 Match-Ported Tall Manifold Kit, for 48/51 EPC/IDA Stage 2 Match-Ported Short Manifold Kit, for 48/51 EPC/IDA STG.1 DUAL IDA MANIFOLD KIT
  • Machined to match EMPI GTV-2 Wedge-Port Heads
  • Complete with all hardware and gaskets
  • For 48/51 EPC/IDA Carburetors
  • Machined to match EMPI GTV-2 Wedge-Port Heads
  • Complete with all hardware and gaskets
  • For 48/51 EPC/IDA Carburetors
  • Machined to match EMPI GTV-2 Wedge-Port Heads
  • Complete with all hardware and gaskets
  • For 48/51 EPC/IDA Carburetors
STG.1 DUAL IDA MANIFOLD KIT STG.2 DUAL IDA MANIFOLD KIT Complete GTV-2 Dual Port Cylinder Head, 85.5mm Bore, Dual Valve Springs
  • Machined to match EMPI GTV-2 Wedge-Port Heads
  • Complete with all hardware and gaskets
  • For 48/51 EPC/IDA Carburetors
  • Machined to match EMPI GTV-2 Wedge-Port Heads
  • Complete with all hardware and gaskets
  • For 48/51 EPC/IDA Carburetors
  • 40 x 35.5mm stainless steel valves, dual hi-rev valve springs, Chromoly retainers,
    hardened keepers, rocker, exhaust and intake studs installed
  • Standard 85.5mm Bore and 53cc Chamber
Complete Dual Port Cylinder Head, 85.5mm Bore, Dual Valve Springs Stage 1 Match-Ported Off-Set Manifold Kit, for HMPX/IDF/Dellorto Stage 2 Match-Ported Off-Set Manifold Kit, for HMPX/IDF/Dellorto
  • Assembled with 40mm x 35.5mm stainless steel valves, dual hi-rev valve springs, Chromoly retainers,
    hardened keepers, rocker, exhaust and intake studs
  • Standard 85.5mm Bore
  • 58cc chamber
  • Machined to match EMPI GTV-2 Wedge-Port Heads
  • Complete with all hardware and gaskets
  • For HMPX/IDF/Dellorto Carburetors
  • Machined to match EMPI GTV-2 Wedge-Port Heads
  • Complete with all hardware and gaskets
  • For HMPX/IDF/Dellorto Carburetors
Stage 3 Match-Ported Off-Set Manifold Kit, for HMPX/IDF/Dellorto Complete Dual Port Cylinder Head w/ Competition Valve Job, 85.5mm Bore, Single Springs SCORE CLASS 11 COMPLETE
SCORE CLASS 11 COMPLETE
Our Price: $299.93
  • Machined to match EMPI GTV-2 Wedge-Port Heads
  • Complete with all hardware and gaskets
  • For HMPX/IDF/Dellorto Carburetors
  • 85.5mm Bore with 40mm x 35.5mm stainless steel valves, 58cc chamber
  • Single hi-rev valve springs, Chromoly retainers, hardened keepers, rocker, exhaust and intake studs
  • Professional performance valve job and assembly
STG.1 DUAL IDF MANIFOLD KIT STG.2 DUAL IDF MANIFOLD KIT Stage 3 Match-Ported Short Manifold Kit, for 48/51 EPC/IDA
  • Machined to match EMPI GTV-2 Wedge-Port Heads
  • Complete with all hardware and gaskets
  • Inlcudes NOS Boss
  • For HMPX/IDF/Dellorto Carburetors
  • Machined to match EMPI GTV-2 Wedge-Port Heads
  • Complete with all hardware and gaskets
  • Inlcudes NOS Boss
  • For HMPX/IDF/Dellorto Carburetors
  • Machined to match EMPI GTV-2 Wedge-Port Heads
  • Complete with all hardware and gaskets
  • For 48/51 EPC/IDA Carburetors
Complete Dual Port Cylinder Head w/ Competition Valve Job, 85.5mm Bore, Dual Springs Complete Dual Port Cylinder Head w/ Competition Valve Job, 92mm Bore, Single Springs Complete Dual Port Cylinder Head w/ Competition Valve Job, 94mm Bore, Single Springs
  • 85.5mm Bore with 40mm x 35.5mm stainless steel valves, 58cc chamber
  • Dual hi-rev valve springs, Chromoly retainers, hardened keepers, rocker, exhaust and intake studs
  • Professional performance valve job and assembly.
  • 92mm Bore with 40mm x 35.5mm stainless steel valves, 58cc chamber
  • Single hi-rev valve springs, Chromoly retainers, hardened keepers, rocker, exhaust and intake studs
  • Professional performance valve job and assembly.
  • 94mm Bore with 40mm x 35.5mm stainless steel valves, 58cc chamber
  • Single hi-rev valve springs, Chromoly retainers, hardened keepers, rocker, exhaust and intake studs
  • Professional performance valve job and assembly.
GTV2 HEAD,V/JB,SGL SPGS 85.5            Stage 3 Match-Ported Tall Manifold Kit, w/ NOS Boss for HMPX/IDF/Dellorto Complete Dual Port Cylinder Head w/ Competition Valve Job, 92mm Bore, Dual Springs
  • 40 x 35.5mm stainless steel valves, single hi-rev valve springs, Chromoly retainers,
    hardened keepers, rocker, exhaust and intake studs installed
  • Competition Valve Job
  • 85.5mm Bore and 56cc Chamber
  • Machined to match EMPI GTV-2 Wedge-Port Heads
  • Complete with all hardware and gaskets
  • Inlcudes NOS Boss
  • For HMPX/IDF/Dellorto Carburetors
  • 92mm Bore with 40mm x 35.5mm stainless steel valves, 58cc chamber
  • Dual hi-rev valve springs, Chromoly retainers, hardened keepers, rocker, exhaust and intake studs
  • Professional performance valve job and assembly.